Massive Selection for Mh Couplings - Oldham Couplings, Body AL, Elastic PA66 – GOODLUCK
Massive Selection for Mh Couplings - Oldham Couplings, Body AL, Elastic PA66 – GOODLUCK Detail:
Dimension table |
mm |
|||||||
Model |
Common DL / D2 inner diameter size |
ΦD |
L |
LF |
LP |
F |
M |
Tightening torque (n.m) |
GL-16X18 |
4-5-6-6.35-7-8 |
16 |
18 |
7.1 |
12 |
3.0 |
M3 |
1.2 |
GL-20X23 |
5-6-6.35-7-8 |
20 |
23 |
9 |
12.7 |
4.5 |
M4 |
1.7 |
GL-20X25 |
5-6-6.35-8-9-9.525-10 |
20 |
25 |
10.1 |
12.7 |
3.0 |
M4 |
2.5 |
GL-25X28 |
5-6-8-9-9.525-10-11-12-14 |
25 |
28 |
21 |
17.7 |
2.8 |
M4 |
2.5 |
GL-32X33 |
5-6-8-9-9.525-10-11-12-12.7-14-15-16 |
32 |
33 |
14 |
20 |
3.4 |
M4 |
2.5 |
GL-40X32 |
8-9-9.525-10-11-12-12.7-14-15-16-17-18-19-20 |
40 |
32 |
14 |
20.3 |
3.2 |
M4 |
2.5 |
GL-44X46 |
8-9-9.525-10-11-1212.7-14-15-16-17-18-19-20-22 |
44 |
46 |
20.7 |
18.4 |
3.5 |
M5 |
5 |
GL-50X38 |
10-12-12.7-14-15-16-17-18-19-20-22-24-25 |
50 |
38 |
16.5 |
22.35 |
3.8 |
M5 |
5 |
GL-55X57 |
10-12-12.7-14-15-16-17-18-19-20-22-24-25-28-30-32 |
55 |
57 |
26.2 |
25.8 |
7.8 |
M5 |
5 |
GL-63X47 |
14-15-16-17-18-19-20-22-24-25-28-30-32 |
63 |
47 |
21 |
25.8 |
6.0 |
M6 |
8 |
GL-70X77 |
16-17-18-19-20-22-24-25-28-30-32-25-38-40 |
70 |
77 |
37 |
25 |
13.5 |
M8 |
20 |
Technical parameter
Technical parameter |
mm |
|||||||
Model |
Rated torque (N.m) |
Allowable eccentricity (mm) |
Allowable deflection angle (∠。) |
Allowable axial deviation (mm) |
Allowable speed (RPM) |
Static torsional stiffness (N.m/rad) |
Moment of inertia (N.m) |
Coupling weight (g) |
GL-16X18 |
0.7 |
0.8 |
3 |
±0.2 |
9000 |
30 |
3.0X10-7 |
6 |
GL-20X23 |
1.2 |
1.5 |
3 |
±0.2 |
3100 |
60 |
1.0X10-6 |
14 |
GL-20X25 |
1.25 |
1.2 |
3 |
±0.2 |
7000 |
58 |
3.0X10-7 |
18 |
GL-25X28 |
2 |
1.6 |
3 |
±0.2 |
6000 |
130 |
2.8X10-6 |
25 |
GL-32X33 |
4.5 |
2 |
3 |
±0.2 |
4800 |
270 |
8.9X10-5 |
44 |
GL-40X32 |
9 |
2.4 |
3 |
±0.2 |
3600 |
520 |
2.1X10-5 |
81 |
GL-44X46 |
12 |
2.8 |
3 |
±0.2 |
3500 |
560 |
3.8X10-5 |
136 |
GL-50X38 |
19 |
2.6 |
3 |
±0.2 |
3000 |
800 |
6.0X10-5 |
142 |
GL-55X57 |
22 |
3.3 |
3 |
±0.2 |
2800 |
795 |
9.9X10-5 |
255 |
GL-63X47 |
33 |
3 |
3 |
±0.2 |
2500 |
1200 |
2.1X10-4 |
320 |
GL-70X77 |
56 |
3.8 |
3 |
±0.2 |
2500 |
1260 |
3.9X10-4 |
445 |
Comparison table of keyway processing dimensions
Shaft diameter dimension |
Standard machining dimension of keyway |
Keyway size |
Standard drawing of keyway processing |
|||
dl/d2 |
b |
t |
(bxh) |
|||
Slot width |
tolerance |
slot depth |
tolerance |
|||
Φ6-Φ7.9 |
2 |
±0.0125 |
1.0 |
±0.10 |
2X2 |
|
Φ8-Φ10 |
3 |
±0.0150 |
1.4 |
3X3 |
||
Φ10.1-Φ12 |
4 |
1.8 |
4X4 |
|||
Φ12.1-Φ17 |
5 |
2.3 |
5X5 |
|||
Φ17.1-Φ22 |
6 |
±0.0180 |
2.8 |
6X6 |
||
Φ22.1-Φ30 |
8 |
3.3 |
±0.20 |
8X7 |
||
Φ30.1-Φ38 |
10 |
±0.0215 |
3.3 |
10X8 |
||
Φ38.1-Φ44 |
12 |
3.8 |
12X8 |
|||
Φ44.1-Φ50 |
14 |
4.3 |
14X9 |
|||
Φ50.1-Φ58 |
16 |
4.4 |
16X10 |
|||
Φ58.1-Φ65 |
18 |
4.4 |
18X11 |
Outline dimension table
Outline dimension table |
mm |
|||||||
Model |
Common DL / D2 inner diameter size |
ΦD |
L |
LF |
LP |
F |
M |
Tightening torque (n.m) |
GLC-16X29 |
4-5-6-6.35 |
16 |
29 |
12.5 |
12 |
3 |
M2.5 |
0.8 |
GLC-20X33 |
5-6-6.35-7-8 |
20 |
33 |
14.1 |
12.7 |
3.8 |
M2.5 |
0.8 |
GLC-25X39 |
5-6-6.35-8-9-9.525-10-11-12 |
25 |
39 |
16.9 |
17.7 |
3.9 |
M3 |
1.2 |
GLC-32X45 |
5-6-8-9-9.525-10-11-12-12.7-14-15-16 |
32 |
45 |
20 |
20 |
4.5 |
M4 |
2.5 |
GLC-40X50 |
8-9-9.525-10-11-12-14-15-16-17-18-19 |
40 |
50 |
23 |
20.3 |
5.5 |
M5 |
5 |
GLC-44X46 |
8-9-9.525-10-11-12-14-15-16-17-18-19-20-22 |
44 |
46 |
20.7 |
18.4 |
7 |
M5 |
5 |
GLC-50X53 |
10-11-12.7-14-15-16-17-18-19-20-22-24 |
50 |
53 |
24.2 |
22.35 |
7.5 |
M6 |
8 |
GLC-50X58 |
10-11-12.7-14-15-16-17-18-19-20-22-24 |
50 |
58 |
26.5 |
22.35 |
6.3 |
M6 |
8 |
GLC-55X57 |
10-11-12.7-14-15-16-17-18-19-20-22-24-25-28 |
55 |
57 |
26.2 |
25.8 |
6.3 |
M6 |
8 |
GLC-63X71 |
14-15-16-17-18-19-20-22-24-25-28-30-32 |
63 |
71 |
32.8 |
26.2 |
7.8 |
M8 |
20 |
GLC-70X77 |
14-15-16-17-18-19-20-22-24-25-28-30-32-35-38 |
70 |
71 |
37 |
25 |
7.7 |
M8 |
20 |
Technical parameter
Technical parameter |
m m |
||||||||
Model | Rated torque (N.m) |
Allowable eccentricity (mm) |
Allowable deflection angle (∠。) |
Allowable axial deviation (mm) | Allowable speed (RPM) | Static torsional stiffness (N.m/rad) |
Moment of inertia (N.m) | Coupling weight (g) |
|
GLC-16X29 | 0.7 | 0.8 | 3 | ±0.2 | 9000 | 30 | 3.5X10-7 | 12 | |
GLC-20X33 | 1..2 | 1.2 | 3 | ±0.2 | 7000 | 58 | 1.5X10-6 | 19 | |
GLC-25X39 | 2 | 1.6 | 3 | ±0.2 | 6000 | 130 | 3.2X10-6 | 35 | |
GLC-32X45 | 4.5 | 2 | 3 | ±0.2 | 4800 | 270 | 1.5X10-5 | 67 | |
GLC40X50 | 9 | 2.4 | 3 | ±0.2 | 3600 | 520 | 4.2X10-5 | 114 | |
GLC-44X46 | 12 | 2.5 | 3 | ±0.2 | 3500 | 800 | 4.5X10-5 | 140 | |
GLC-50X53 | 19 | 2.6 | 3 | ±0.2 | 3000 | 800 | 1.0X10-4 | 190 | |
GLC-50X58 | 19 | 3 | 3 | ±0.2 | 3000 | 800 | 1.1X10-4 | 215 | |
GLC-55X57 | 25 | 3.2 | 3 | ±0.2 | 3000 | 900 | 1.3X10-5 | 260 | |
GLC-63X71 | 33 | 3 | 3 | ±0.2 | 2550 | 1200 | 3.5X10-4 | 455 | |
GLC -70X77 | 56 | 3.5 | 3 | ±0.2 | 2500 | 1260 | 4.1X10-4 | 520 |
Oldham couplings are three-piece flexible shaft couplings that are used to connect driving and driven shafts in mechanical power transmission assemblies. Flexible shaft couplings are used to counter the inevitable misalignment that occurs between connected shafts and, in some cases, to absorb shock. Material: Uubs are in Aluminium, elastic body is in PA66.
Product detail pictures:
Related Product Guide:
To be able to ideal satisfy client's requirements, all of our operations are strictly performed in line with our motto "High High-quality, Competitive Price tag, Fast Service" for Massive Selection for Mh Couplings - Oldham Couplings, Body AL, Elastic PA66 – GOODLUCK , The product will supply to all over the world, such as: Naples, Turkey, Luxembourg, If you need to have any of our merchandise, or have other items to be produced, make sure you send us your inquiries, samples or in depth drawings. Meanwhile, aiming to develop into an international enterprise group, we look forward to receiving offers for joint ventures and other cooperative projects.
By Martha from Bogota - 2018.06.18 19:26
Problems can be quickly and effectively resolved, it is worth to be trust and working together.
By Frances from Spain - 2017.09.26 12:12