Personlized Products Mc Couplings - Oldham Couplings, Body AL, Elastic PA66 – GOODLUCK
Personlized Products Mc Couplings - Oldham Couplings, Body AL, Elastic PA66 – GOODLUCK Detail:
Dimension table |
mm |
|||||||
Model |
Common DL / D2 inner diameter size |
ΦD |
L |
LF |
LP |
F |
M |
Tightening torque (n.m) |
GL-16X18 |
4-5-6-6.35-7-8 |
16 |
18 |
7.1 |
12 |
3.0 |
M3 |
1.2 |
GL-20X23 |
5-6-6.35-7-8 |
20 |
23 |
9 |
12.7 |
4.5 |
M4 |
1.7 |
GL-20X25 |
5-6-6.35-8-9-9.525-10 |
20 |
25 |
10.1 |
12.7 |
3.0 |
M4 |
2.5 |
GL-25X28 |
5-6-8-9-9.525-10-11-12-14 |
25 |
28 |
21 |
17.7 |
2.8 |
M4 |
2.5 |
GL-32X33 |
5-6-8-9-9.525-10-11-12-12.7-14-15-16 |
32 |
33 |
14 |
20 |
3.4 |
M4 |
2.5 |
GL-40X32 |
8-9-9.525-10-11-12-12.7-14-15-16-17-18-19-20 |
40 |
32 |
14 |
20.3 |
3.2 |
M4 |
2.5 |
GL-44X46 |
8-9-9.525-10-11-1212.7-14-15-16-17-18-19-20-22 |
44 |
46 |
20.7 |
18.4 |
3.5 |
M5 |
5 |
GL-50X38 |
10-12-12.7-14-15-16-17-18-19-20-22-24-25 |
50 |
38 |
16.5 |
22.35 |
3.8 |
M5 |
5 |
GL-55X57 |
10-12-12.7-14-15-16-17-18-19-20-22-24-25-28-30-32 |
55 |
57 |
26.2 |
25.8 |
7.8 |
M5 |
5 |
GL-63X47 |
14-15-16-17-18-19-20-22-24-25-28-30-32 |
63 |
47 |
21 |
25.8 |
6.0 |
M6 |
8 |
GL-70X77 |
16-17-18-19-20-22-24-25-28-30-32-25-38-40 |
70 |
77 |
37 |
25 |
13.5 |
M8 |
20 |
Technical parameter
Technical parameter |
mm |
|||||||
Model |
Rated torque (N.m) |
Allowable eccentricity (mm) |
Allowable deflection angle (∠。) |
Allowable axial deviation (mm) |
Allowable speed (RPM) |
Static torsional stiffness (N.m/rad) |
Moment of inertia (N.m) |
Coupling weight (g) |
GL-16X18 |
0.7 |
0.8 |
3 |
±0.2 |
9000 |
30 |
3.0X10-7 |
6 |
GL-20X23 |
1.2 |
1.5 |
3 |
±0.2 |
3100 |
60 |
1.0X10-6 |
14 |
GL-20X25 |
1.25 |
1.2 |
3 |
±0.2 |
7000 |
58 |
3.0X10-7 |
18 |
GL-25X28 |
2 |
1.6 |
3 |
±0.2 |
6000 |
130 |
2.8X10-6 |
25 |
GL-32X33 |
4.5 |
2 |
3 |
±0.2 |
4800 |
270 |
8.9X10-5 |
44 |
GL-40X32 |
9 |
2.4 |
3 |
±0.2 |
3600 |
520 |
2.1X10-5 |
81 |
GL-44X46 |
12 |
2.8 |
3 |
±0.2 |
3500 |
560 |
3.8X10-5 |
136 |
GL-50X38 |
19 |
2.6 |
3 |
±0.2 |
3000 |
800 |
6.0X10-5 |
142 |
GL-55X57 |
22 |
3.3 |
3 |
±0.2 |
2800 |
795 |
9.9X10-5 |
255 |
GL-63X47 |
33 |
3 |
3 |
±0.2 |
2500 |
1200 |
2.1X10-4 |
320 |
GL-70X77 |
56 |
3.8 |
3 |
±0.2 |
2500 |
1260 |
3.9X10-4 |
445 |
Comparison table of keyway processing dimensions
Shaft diameter dimension |
Standard machining dimension of keyway |
Keyway size |
Standard drawing of keyway processing |
|||
dl/d2 |
b |
t |
(bxh) |
|
||
Slot width |
tolerance |
slot depth |
tolerance |
|||
Φ6-Φ7.9 |
2 |
±0.0125 |
1.0 |
±0.10 |
2X2 |
|
Φ8-Φ10 |
3 |
±0.0150 |
1.4 |
3X3 |
||
Φ10.1-Φ12 |
4 |
1.8 |
4X4 |
|||
Φ12.1-Φ17 |
5 |
2.3 |
5X5 |
|||
Φ17.1-Φ22 |
6 |
±0.0180 |
2.8 |
6X6 |
||
Φ22.1-Φ30 |
8 |
3.3 |
±0.20 |
8X7 |
||
Φ30.1-Φ38 |
10 |
±0.0215 |
3.3 |
10X8 |
||
Φ38.1-Φ44 |
12 |
3.8 |
12X8 |
|||
Φ44.1-Φ50 |
14 |
4.3 |
14X9 |
|||
Φ50.1-Φ58 |
16 |
4.4 |
16X10 |
|||
Φ58.1-Φ65 |
18 |
4.4 |
18X11 |
Outline dimension table
Outline dimension table |
mm |
|||||||
Model |
Common DL / D2 inner diameter size |
ΦD |
L |
LF |
LP |
F |
M |
Tightening torque (n.m) |
GLC-16X29 |
4-5-6-6.35 |
16 |
29 |
12.5 |
12 |
3 |
M2.5 |
0.8 |
GLC-20X33 |
5-6-6.35-7-8 |
20 |
33 |
14.1 |
12.7 |
3.8 |
M2.5 |
0.8 |
GLC-25X39 |
5-6-6.35-8-9-9.525-10-11-12 |
25 |
39 |
16.9 |
17.7 |
3.9 |
M3 |
1.2 |
GLC-32X45 |
5-6-8-9-9.525-10-11-12-12.7-14-15-16 |
32 |
45 |
20 |
20 |
4.5 |
M4 |
2.5 |
GLC-40X50 |
8-9-9.525-10-11-12-14-15-16-17-18-19 |
40 |
50 |
23 |
20.3 |
5.5 |
M5 |
5 |
GLC-44X46 |
8-9-9.525-10-11-12-14-15-16-17-18-19-20-22 |
44 |
46 |
20.7 |
18.4 |
7 |
M5 |
5 |
GLC-50X53 |
10-11-12.7-14-15-16-17-18-19-20-22-24 |
50 |
53 |
24.2 |
22.35 |
7.5 |
M6 |
8 |
GLC-50X58 |
10-11-12.7-14-15-16-17-18-19-20-22-24 |
50 |
58 |
26.5 |
22.35 |
6.3 |
M6 |
8 |
GLC-55X57 |
10-11-12.7-14-15-16-17-18-19-20-22-24-25-28 |
55 |
57 |
26.2 |
25.8 |
6.3 |
M6 |
8 |
GLC-63X71 |
14-15-16-17-18-19-20-22-24-25-28-30-32 |
63 |
71 |
32.8 |
26.2 |
7.8 |
M8 |
20 |
GLC-70X77 |
14-15-16-17-18-19-20-22-24-25-28-30-32-35-38 |
70 |
71 |
37 |
25 |
7.7 |
M8 |
20 |
Technical parameter
Technical parameter |
m m |
||||||||
Model | Rated torque (N.m) |
Allowable eccentricity (mm) |
Allowable deflection angle (∠。) |
Allowable axial deviation (mm) | Allowable speed (RPM) | Static torsional stiffness (N.m/rad) |
Moment of inertia (N.m) | Coupling weight (g) |
|
GLC-16X29 | 0.7 | 0.8 | 3 | ±0.2 | 9000 | 30 | 3.5X10-7 | 12 | |
GLC-20X33 | 1..2 | 1.2 | 3 | ±0.2 | 7000 | 58 | 1.5X10-6 | 19 | |
GLC-25X39 | 2 | 1.6 | 3 | ±0.2 | 6000 | 130 | 3.2X10-6 | 35 | |
GLC-32X45 | 4.5 | 2 | 3 | ±0.2 | 4800 | 270 | 1.5X10-5 | 67 | |
GLC40X50 | 9 | 2.4 | 3 | ±0.2 | 3600 | 520 | 4.2X10-5 | 114 | |
GLC-44X46 | 12 | 2.5 | 3 | ±0.2 | 3500 | 800 | 4.5X10-5 | 140 | |
GLC-50X53 | 19 | 2.6 | 3 | ±0.2 | 3000 | 800 | 1.0X10-4 | 190 | |
GLC-50X58 | 19 | 3 | 3 | ±0.2 | 3000 | 800 | 1.1X10-4 | 215 | |
GLC-55X57 | 25 | 3.2 | 3 | ±0.2 | 3000 | 900 | 1.3X10-5 | 260 | |
GLC-63X71 | 33 | 3 | 3 | ±0.2 | 2550 | 1200 | 3.5X10-4 | 455 | |
GLC -70X77 | 56 | 3.5 | 3 | ±0.2 | 2500 | 1260 | 4.1X10-4 | 520 |
Oldham couplings are three-piece flexible shaft couplings that are used to connect driving and driven shafts in mechanical power transmission assemblies. Flexible shaft couplings are used to counter the inevitable misalignment that occurs between connected shafts and, in some cases, to absorb shock. Material: Uubs are in Aluminium, elastic body is in PA66.
Product detail pictures:


Related Product Guide:
Our firm promises all consumers with the first-class products as well as most satisfying post-sale services. We warmly welcome our regular and new consumers to join us for Personlized Products Mc Couplings - Oldham Couplings, Body AL, Elastic PA66 – GOODLUCK , The product will supply to all over the world, such as: Pakistan, Hungary, Porto, With a wide range, good quality, reasonable prices and stylish designs, our products are extensively used in this field and other industries. We welcome new and old customers from all walks of life to contact us for future business relationships and achieving mutual success! We welcome customers, business associations and friends from all parts of the world to contact us and seek cooperation for mutual benefits.

The factory technical staff gave us a lot of good advice in the cooperation process, this is very good, we are very grateful.
