Professional Design Couplings - Oldham Couplings, Body AL, Elastic PA66 – GOODLUCK
Professional Design Couplings - Oldham Couplings, Body AL, Elastic PA66 – GOODLUCK Detail:
Dimension table |
mm |
|||||||
Model |
Common DL / D2 inner diameter size |
ΦD |
L |
LF |
LP |
F |
M |
Tightening torque (n.m) |
GL-16X18 |
4-5-6-6.35-7-8 |
16 |
18 |
7.1 |
12 |
3.0 |
M3 |
1.2 |
GL-20X23 |
5-6-6.35-7-8 |
20 |
23 |
9 |
12.7 |
4.5 |
M4 |
1.7 |
GL-20X25 |
5-6-6.35-8-9-9.525-10 |
20 |
25 |
10.1 |
12.7 |
3.0 |
M4 |
2.5 |
GL-25X28 |
5-6-8-9-9.525-10-11-12-14 |
25 |
28 |
21 |
17.7 |
2.8 |
M4 |
2.5 |
GL-32X33 |
5-6-8-9-9.525-10-11-12-12.7-14-15-16 |
32 |
33 |
14 |
20 |
3.4 |
M4 |
2.5 |
GL-40X32 |
8-9-9.525-10-11-12-12.7-14-15-16-17-18-19-20 |
40 |
32 |
14 |
20.3 |
3.2 |
M4 |
2.5 |
GL-44X46 |
8-9-9.525-10-11-1212.7-14-15-16-17-18-19-20-22 |
44 |
46 |
20.7 |
18.4 |
3.5 |
M5 |
5 |
GL-50X38 |
10-12-12.7-14-15-16-17-18-19-20-22-24-25 |
50 |
38 |
16.5 |
22.35 |
3.8 |
M5 |
5 |
GL-55X57 |
10-12-12.7-14-15-16-17-18-19-20-22-24-25-28-30-32 |
55 |
57 |
26.2 |
25.8 |
7.8 |
M5 |
5 |
GL-63X47 |
14-15-16-17-18-19-20-22-24-25-28-30-32 |
63 |
47 |
21 |
25.8 |
6.0 |
M6 |
8 |
GL-70X77 |
16-17-18-19-20-22-24-25-28-30-32-25-38-40 |
70 |
77 |
37 |
25 |
13.5 |
M8 |
20 |
Technical parameter
Technical parameter |
mm |
|||||||
Model |
Rated torque (N.m) |
Allowable eccentricity (mm) |
Allowable deflection angle (∠。) |
Allowable axial deviation (mm) |
Allowable speed (RPM) |
Static torsional stiffness (N.m/rad) |
Moment of inertia (N.m) |
Coupling weight (g) |
GL-16X18 |
0.7 |
0.8 |
3 |
±0.2 |
9000 |
30 |
3.0X10-7 |
6 |
GL-20X23 |
1.2 |
1.5 |
3 |
±0.2 |
3100 |
60 |
1.0X10-6 |
14 |
GL-20X25 |
1.25 |
1.2 |
3 |
±0.2 |
7000 |
58 |
3.0X10-7 |
18 |
GL-25X28 |
2 |
1.6 |
3 |
±0.2 |
6000 |
130 |
2.8X10-6 |
25 |
GL-32X33 |
4.5 |
2 |
3 |
±0.2 |
4800 |
270 |
8.9X10-5 |
44 |
GL-40X32 |
9 |
2.4 |
3 |
±0.2 |
3600 |
520 |
2.1X10-5 |
81 |
GL-44X46 |
12 |
2.8 |
3 |
±0.2 |
3500 |
560 |
3.8X10-5 |
136 |
GL-50X38 |
19 |
2.6 |
3 |
±0.2 |
3000 |
800 |
6.0X10-5 |
142 |
GL-55X57 |
22 |
3.3 |
3 |
±0.2 |
2800 |
795 |
9.9X10-5 |
255 |
GL-63X47 |
33 |
3 |
3 |
±0.2 |
2500 |
1200 |
2.1X10-4 |
320 |
GL-70X77 |
56 |
3.8 |
3 |
±0.2 |
2500 |
1260 |
3.9X10-4 |
445 |
Comparison table of keyway processing dimensions
Shaft diameter dimension |
Standard machining dimension of keyway |
Keyway size |
Standard drawing of keyway processing |
|||
dl/d2 |
b |
t |
(bxh) |
|||
Slot width |
tolerance |
slot depth |
tolerance |
|||
Φ6-Φ7.9 |
2 |
±0.0125 |
1.0 |
±0.10 |
2X2 |
|
Φ8-Φ10 |
3 |
±0.0150 |
1.4 |
3X3 |
||
Φ10.1-Φ12 |
4 |
1.8 |
4X4 |
|||
Φ12.1-Φ17 |
5 |
2.3 |
5X5 |
|||
Φ17.1-Φ22 |
6 |
±0.0180 |
2.8 |
6X6 |
||
Φ22.1-Φ30 |
8 |
3.3 |
±0.20 |
8X7 |
||
Φ30.1-Φ38 |
10 |
±0.0215 |
3.3 |
10X8 |
||
Φ38.1-Φ44 |
12 |
3.8 |
12X8 |
|||
Φ44.1-Φ50 |
14 |
4.3 |
14X9 |
|||
Φ50.1-Φ58 |
16 |
4.4 |
16X10 |
|||
Φ58.1-Φ65 |
18 |
4.4 |
18X11 |
Outline dimension table
Outline dimension table |
mm |
|||||||
Model |
Common DL / D2 inner diameter size |
ΦD |
L |
LF |
LP |
F |
M |
Tightening torque (n.m) |
GLC-16X29 |
4-5-6-6.35 |
16 |
29 |
12.5 |
12 |
3 |
M2.5 |
0.8 |
GLC-20X33 |
5-6-6.35-7-8 |
20 |
33 |
14.1 |
12.7 |
3.8 |
M2.5 |
0.8 |
GLC-25X39 |
5-6-6.35-8-9-9.525-10-11-12 |
25 |
39 |
16.9 |
17.7 |
3.9 |
M3 |
1.2 |
GLC-32X45 |
5-6-8-9-9.525-10-11-12-12.7-14-15-16 |
32 |
45 |
20 |
20 |
4.5 |
M4 |
2.5 |
GLC-40X50 |
8-9-9.525-10-11-12-14-15-16-17-18-19 |
40 |
50 |
23 |
20.3 |
5.5 |
M5 |
5 |
GLC-44X46 |
8-9-9.525-10-11-12-14-15-16-17-18-19-20-22 |
44 |
46 |
20.7 |
18.4 |
7 |
M5 |
5 |
GLC-50X53 |
10-11-12.7-14-15-16-17-18-19-20-22-24 |
50 |
53 |
24.2 |
22.35 |
7.5 |
M6 |
8 |
GLC-50X58 |
10-11-12.7-14-15-16-17-18-19-20-22-24 |
50 |
58 |
26.5 |
22.35 |
6.3 |
M6 |
8 |
GLC-55X57 |
10-11-12.7-14-15-16-17-18-19-20-22-24-25-28 |
55 |
57 |
26.2 |
25.8 |
6.3 |
M6 |
8 |
GLC-63X71 |
14-15-16-17-18-19-20-22-24-25-28-30-32 |
63 |
71 |
32.8 |
26.2 |
7.8 |
M8 |
20 |
GLC-70X77 |
14-15-16-17-18-19-20-22-24-25-28-30-32-35-38 |
70 |
71 |
37 |
25 |
7.7 |
M8 |
20 |
Technical parameter
Technical parameter |
m m |
||||||||
Model | Rated torque (N.m) |
Allowable eccentricity (mm) |
Allowable deflection angle (∠。) |
Allowable axial deviation (mm) | Allowable speed (RPM) | Static torsional stiffness (N.m/rad) |
Moment of inertia (N.m) | Coupling weight (g) |
|
GLC-16X29 | 0.7 | 0.8 | 3 | ±0.2 | 9000 | 30 | 3.5X10-7 | 12 | |
GLC-20X33 | 1..2 | 1.2 | 3 | ±0.2 | 7000 | 58 | 1.5X10-6 | 19 | |
GLC-25X39 | 2 | 1.6 | 3 | ±0.2 | 6000 | 130 | 3.2X10-6 | 35 | |
GLC-32X45 | 4.5 | 2 | 3 | ±0.2 | 4800 | 270 | 1.5X10-5 | 67 | |
GLC40X50 | 9 | 2.4 | 3 | ±0.2 | 3600 | 520 | 4.2X10-5 | 114 | |
GLC-44X46 | 12 | 2.5 | 3 | ±0.2 | 3500 | 800 | 4.5X10-5 | 140 | |
GLC-50X53 | 19 | 2.6 | 3 | ±0.2 | 3000 | 800 | 1.0X10-4 | 190 | |
GLC-50X58 | 19 | 3 | 3 | ±0.2 | 3000 | 800 | 1.1X10-4 | 215 | |
GLC-55X57 | 25 | 3.2 | 3 | ±0.2 | 3000 | 900 | 1.3X10-5 | 260 | |
GLC-63X71 | 33 | 3 | 3 | ±0.2 | 2550 | 1200 | 3.5X10-4 | 455 | |
GLC -70X77 | 56 | 3.5 | 3 | ±0.2 | 2500 | 1260 | 4.1X10-4 | 520 |
Oldham couplings are three-piece flexible shaft couplings that are used to connect driving and driven shafts in mechanical power transmission assemblies. Flexible shaft couplings are used to counter the inevitable misalignment that occurs between connected shafts and, in some cases, to absorb shock. Material: Uubs are in Aluminium, elastic body is in PA66.
Product detail pictures:
Related Product Guide:
With our excellent administration, strong technical capability and strict excellent control method, we carry on to offer our clients with responsible good quality, reasonable costs and great companies. We intention at becoming considered one of your most responsible partners and earning your pleasure for Professional Design Couplings - Oldham Couplings, Body AL, Elastic PA66 – GOODLUCK , The product will supply to all over the world, such as: Jeddah, Mauritania, Israel, Make sure you genuinely feel free to send us your requirements and we are going to respond for you asap. We now have got a skilled engineering group to serve for your just about every detailed needs. Cost-free samples could be sent to suit your needs personally to understand much more information. In an effort to meet your requires, be sure to seriously feel free to make contact with us. You may send us emails and contact us directly. Moreover, we welcome visits to our factory from around the globe for much better recognizing of our organization. nd objects. In our trade with merchants of numerous countries, we usually adhere for the principle of equality and mutual benefit. It is really our hope to market, by joint efforts, each trade and friendship to our mutual advantage. We look forward to getting your inquiries.
By Genevieve from Bahamas - 2017.03.28 16:34
This is the first business after our company establish, products and services are very satisfying, we have a good start, we hope to cooperate continuous in the future!
By Elaine from Bangkok - 2018.04.25 16:46